Hitachi AMS 2100 Hardware Manual page 168

AMS 2300 Base Unit
Expansion Unit
High-density Expansion Unit
1. After inserting a plug into a socket on a PDB, install the cable clamp to
prevent it from accidentally becoming unplugged.
NOTE: When using PDB without a cable clamp, ensure that the power
cable is firmly fixed to the rack with repeat binders, etc. to prevent the
connector from coming off.
2. Route the power cables.
3. Recheck the power cable plug to make sure it is still secure in the PDB
and that it has not become loosened during the cable routing. See
Figure
Figure 5-45: Connecting Power Cables (Rack PDB)
5–50
Table 5-10: AMS 2100/2300 Power Requirements
Unit
5-45.
Installation
Hitachi AMS 2100/2300 Storage System Hardware Guide
Current at 100 - 120VAC
3.8 Amps
2.4 Amps
3.7 Amps