Connecting A Lan Cable - Hitachi AMS 2100 Hardware Manual

Connecting a LAN cable

CAUTION! To prevent electromagnetic interference from a power
cable to the signals in an ENC cable, do not route power cables near
an ENC cable.
1. Connect a customer-provided CAT 5 or CAT6 Ethernet LAN cable to the
management LAN port on the control unit #0 or control unit #1 in the
array.
2. Connect the other end of the LAN cable to a customer provided LAN-HUB
or to the LAN port on the management PC.
:
• Use LAN crossover cables when connecting to the LAN-HUB with 10/
100BASE-T (Category 5 or 6). Use straight LAN cables when
connecting the array directly to a management PC.
• The default IP address for the user LAN port on the control unit #0 is
192.168.0.16. The default IP address for the user LAN port on the
control unit #1 is 192.168.0.17.
5–48
Figure 5-44: Connecting the LAN Cable
Installation
Hitachi AMS 2100/2300 Storage System Hardware Guide