Navigator 2 Features - Hitachi AMS 2100 Hardware Manual

Navigator 2 features

Table 7-8
Category
Configuration display
Manage Logical Units
Setting the Selection
Configuration
Upgrades
Error Monitoring
describes the main features of Navigator 2.
Table 7-8: Navigator 2 Features
Function
Name
Component Displays the status of a component such
status display as drive and fan.
Property Displays the status about system
display components of an array unit, RAID, logical
units, etc.
Create Logical Used to add a logical unit. A new logical
Units unit is added by specifying its capacity.
Delete Logical Deletes the defined logical unit. User data
Units is deleted.
Format Logical Required to make a defined logical unit
Units (LU) accessible by the host. Writes null
data to the specified logical unit, and
deletes user data.
Command Sets up the command devices. This is only
Device used for replication purposes.
Setting the Sets up the boot option. The array must
Boot Option be restarted to implement the setting
Setup and Sets and displays IP addresses and
Display iSCSI security information, etc.
Information
System Sets up the system parameters.
Parameters
Port option Configures the options on each port used
by the array
Setup and Sets and displays the date and time.
Display of RTC
Firmware Downloads and updates the array
Upgrades microcode. You must reboot the array to
implement the settings.
Report when a Polls the array and displays the status. If
failure occurs an error is detected, it is output into a log
and controller file and sent by email. A specified
status display application is started.
Configuration
Hitachi AMS 2100/2300 Storage System Hardware Guide
Description
System
Usable
During
Operation?
Yes
Yes
Yes
No
No /Yes
No
No
Yes
Yes
Yes
No /Yes
Yes
7–11