Ordering - GE N60 Instruction Manual

2.1 INTRODUCTION
a) OVERVIEW
The N60 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, digital input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
2
Order codes are subject to change without notice. CPU modules 9G, 9H, 9L, and 9M are obsolete. See
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules (regu-
lar CT/VT modules or the HardFiber modules). The order code options are described in the following sub-sections.
b) ORDER CODES WITH TRADITIONAL CTS AND VTS
The order codes for units with traditional CTs and VTs are shown below.
Table 2–3: N60 ORDER CODES
N60 - * ** - *
BASE UNIT N60 | |
CPU E |
J |
K |
N |
S |
SOFTWARE 00
03
(IEC 61850 options
06
not available with
07
type E CPUs)
14
15
16
17
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
CT/VT MODULES
DIGITAL
INPUTS/OUTPUTS
TRANSDUCER INPUTS/OUTPUTS
(maximum of 3 per unit)
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
2-4
* * - F ** - H ** - M ** - P
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
H | | | | |
A | | | | |
C | | | |
D | | | |
A | | | |
P | | | |
G | | | |
B | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
H | | |
L | | |
8F | 8F
8H | 8H
8L | 8L
8N | 8N
| | XX XX
4L 4L 4L 4L
67 67 67 67
6C 6C 6C 6C
6D 6D 6D 6D
6E 6E 6E 6E
6F 6F 6F 6F
6P 6P 6P 6P
6R 6R 6R 6R
6S 6S 6S 6S
6T 6T 6T 6T
6U 6U 6U 6U
6V 6V 6V 6V
5A 5A 5A 5A
5C 5C 5C 5C
N60 Network Stability and Synchrophasor Measurement System
for the latest ordering options.
** - U ** - W/X ** Full Size Horizontal Mount
| | | Base Unit
| | | RS485 and RS485
| | | RS485, multi-mode ST 100Base-FX and 10/100Base-T
| | | RS485, multi-mode ST redundant 100Base-FX and 10/100Base-T
| | | RS485 and 10/100Base-T
| | | RS485 and six-port managed Ethernet switch
| | | No software options
| | | IEC 61850
| | | Phasor measurement unit (PMU)
| | | IEC 61850 and phasor measurement unit (PMU)
| | | Two phasor measurement units (PMUs); requires at least one CT/VT module
| | | IEC 61850 and two phasor measurement units (PMUs); requires at least one CT/VT module
| | | Four phasor measurement units (PMUs); requires at least two CT/VT modules
| | | IEC 61850 and four phasor measurement units (PMUs); requires at least two CT/VT modules
| | | Horizontal (19" rack)
| | | Horizontal (19" rack) with harsh environmental coating
| | | English display
| | | French display
| | | Chinese display
| | | English display with 4 small and 12 large programmable pushbuttons
| | | French display with 4 small and 12 large programmable pushbuttons
| | | Chinese display with 4 small and 12 large programmable pushbuttons
| | | Enhanced front panel with English display
| | | Enhanced front panel with French display
| | | Enhanced front panel with Russian display
| | | Enhanced front panel with Chinese display
| | | Enhanced front panel with English display and user-programmable pushbuttons
| | | Enhanced front panel with French display and user-programmable pushbuttons
| | | Enhanced front panel with Russian display and user-programmable pushbuttons
| | | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | | 125 / 250 V AC/DC power supply
| | | 24 to 48 V (DC only) power supply
| 8F | Standard 4CT/4VT
| 8H | Standard 8CT
| 8L | Standard 4CT/4VT with enhanced diagnostics (required for PMU options)
| 8N | Standard 8CT with enhanced diagnostics (required for PMU options)
XX XX No Module
4L 4L 14 Form-A (no monitoring) Latchable outputs
67 67 8 Form-A (no monitoring) outputs
6C 6C 8 Form-C outputs
6D 6D 16 digital inputs
6E 6E 4 Form-C outputs, 8 digital inputs
6F 6F 8 Fast Form-C outputs
6P 6P 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R 6R 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S 6S 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T 6T 4 Form-A (no monitoring) outputs, 8 digital inputs
6U 6U 6 Form-A (no monitoring) outputs, 4 digital inputs
6V 6V 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
5A 5A 4 dcmA inputs, 4 dcmA outputs (only one 5A module is allowed)
5C 5C 8 RTD inputs
2G 2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H 2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
| 2S Six-port managed Ethernet switch with high voltage power supply (110 to 250 V DC / 100 to 240 V AC)
| 2T Six-port managed Ethernet switch with low voltage power supply (48 V DC)
73 73 1550 nm, single-mode, LASER, 2 Channel
77 77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7H 7H 820 nm, multi-mode, LED, 2 Channels
7I 7I 1300 nm, multi-mode, LED, 2 Channels
7M 7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7S 7S G.703, 2 Channels
7V 7V RS422, 2 Channels, 2 Clock Inputs
7W 7W RS422, 2 Channels
2 PRODUCT DESCRIPTION

2.1.2 ORDERING

GE Multilin