Virtual Outputs; Autoreclose; Rxgoose Status - GE D30 Instruction Manual

STATUS
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.

6.3.7 Virtual outputs

ACTUAL VALUES  STATUS  VIRTUAL OUTPUTS
 VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.

6.3.8 Autoreclose

ACTUAL VALUES  STATUS  AUTORECLOSE  AUTORECLOSE 1
 AUTORECLOSE 1

This menu displays the reclosure shot count.
6

6.3.9 RxGOOSE status

ACTUAL VALUES  STATUS  RxGOOSE STATUS
 RxGOOSE
 STATUS
The D30 is provided with optional IEC 61850 capability. This feature is specified as a software option at the
time of ordering. See the Order Codes section of chapter 2 for details.
The
All RxGOOSE Online
Input.
6-6
Cont Op xx

Off
Virt Op 1

Off
Virt Op 96

Off
AUTORECLOSE 1

SHOT COUNT:
All RxGOOSE Online:

Yes
RxGOOSE 1 Status:

Offline
RxGOOSE 64 Status:

Offline
actual value does not consider RxGOOSE that are not configured or are not used by any RxGOOSE
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off

Range: On, Off
Range: 0, 1, 2, 3, 4
0
Range: Yes, No
Range: Online, Offline

Range: Online, Offline
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES