Notice: If a "no device" or "no file" error appears, it is possible that the USB device is
incompatible. Please try another USB flash drive.
Please be patient. It will take 2-3 minutes to update.
5.3 Loading Default Setup
The DVR has different setup blocks, like Basic, Record, Schedule, Motion etc.
Users can choose any block to restore default setup, see Fig 5.2 Reset Blocks.
Enter TOOLS configuration, refer to 4.2.10 Tools Configuration.
STEP1
Click Load default. Select setup blocks; please refer to Fig 5.2 Reset
STEP2
Blocks.
Press OK to reset to default. It will return to TOOLS interface when
STEP3
finished.
5.4 Checking System Information
To check system information like firmware version, IP address, etc.
Press right mouse button to show the control bar. Click Menu, refer
STEP1
to Fig 4.2 Pop up Menu.
Click Info, the window below will appear.
STEP2
Click System, the window below will display. Check firmware version,
STEP3
QSTD2400 Series DVR User's Manual
Fig 5.2 Reset Blocks
Fig 5.3 Status Interface
39