- QD28414W 60 ft. Camera Cables x12 Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www.Q-See.com Cameras x4 - QSC48030 Cameras x4 - QPSCDCA QSC48030 Power Supply x4 Q-See is a registered trademark of Digital Peripheral Solutions, Inc.
Connect CONNECTING CAMERAS: QD28414W & QD28414 DVR and Cameras Connect the 60 ft. extension cable to the camera Connect the female power end of the cable to the splitter Connect the 8 way splitter to the AC adapter Connect the video end to the video port on the DVR Repeat the same process for cameras 2 through 8 FRONT VIEW Yellow: Video Out...
Page 3
Plug in the VGA cable (not included) to the VGA port on the DVR Connect the other end of the VGA cable to the Monitor CAUTION: Use only the power adapters supplied with the Q-See unit. We recommend Plugging the DVR and Cameras into a Transient Voltage Surge Protector (UL-449 Rating)* 330 or lower clamping voltage, Joule rating 400.
Page 4
Setup Setting up the DVR to Record: This system offers four modes for recording: 1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor. For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual. To navigate through the DVR menu, three options are available: 1.
Page 5
Setting up the DVR to Playback Files Display the SYSTEM screen (B5) and select the MOTION option (GREEN box). Press the SEARCH key on the DVR, enter User Id and Password if the system is password protected. The SEARCH option will display (C1). Select Time Search (C1 RED box) and press the ENTER key.
Page 6
BACKUP INFO screen (D2). This screen will show the START and END time, the device, the space required, and 1) Need assistance setting up the remote monitoring feature with your Q-See how much space is available. Select OK, DVR? Visit www.portforward.com/qsee and the backup will start.