Huawei ETP4830-A1 User Manual page 43

ETP4830-A1
User Manual
Main Menu
Step 3 Set the IP addresses and ports for the active and standby servers of the NetEco, as described
in Table
Table 6-12 NetEco parameters
Main
Menu
Settings
----End
Setting Parameters Before SNMP Management
Before you use SNMP to perform remote management, set the required parameters.
Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway on the LCD, as described in
Table 6-13 IP parameters
Main Menu
Quick Settings
Issue 06 (2014-02-20)
Second-Level
Menu
6-12.
Second- Third-Level
Menu
Level
Menu
Comm Para NetEco Main
IP
NetEco Bak IP
NetEco Port
Second-Level
Menu
IP Address
Subnet mask
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
Default Setting
Value
58.251.159.13 Set this parameter to the IP
6 address of the active
NetEco server.
58.251.159.13 Set this parameter to the IP
6 address of the standby
NetEco server.
31220 Set a port for the NetEco.
Default Value
192.168.0.10
255.255.255.0
6 Commissioning
Setting
the network
administrator.
Table 6-13.
Setting
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
36