Canon iPF6100 Service Manual page 686

Chapter 8
Display massage
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Ink tank error.
Press OK and replace ink
tank.
Maintenance cartridge full.
Replace the maintenance
cartridge.
No Maintenance Cartridge
capacity.
Replace the maintenance
cartridge.
No maintenance cartridge.
Check the maintenance
cartridge.
Maintenance cartridge
problem.
Replace the maintenance
cartridge.
Maintenance cartridge
problem.
Replace the maintenance
cartridge.
Manual printing is selected,
but a roll is loaded.
Press Load/Eject and
remove the roll.
Sheet printing is selected.
Press Load/Eject and load
sheets.
Roll printing is selected, but
sheets are loaded.
Press OK, remove the
sheets, and load a roll.
This type of media is not
compatible with HP-GL/2.
Borderless printng not
possible. Check roll
position.
Online: Print
Load/Eject: Change Paper
Borderless printng not
possible.
Check paper size setting.
Borderless printng not
possible.
Paper stretched or shrank.
Confirm usage cond. of the
paper.
Borderless printng not
possible.
Check supported paper.
Insufficient paper for job.
Online: Print
Stop: Stop Printing
Load/Eject: Change Paper
Insufficient paper for job.
Insufficient paper for job.
Cannot adjust printhead.
Press Online to clear the
error and readjust printhead.
8-38
Code*
03830206-2547 MBK2 ink tank ID error
03830207-254A R ink tank ID error
03830208-254C G ink tank ID error
03830209-254B B ink tank ID error
03830212-2544 PM ink tank ID error
03830213-2545 PC ink tank ID error
03830215-2549 PGY ink tank ID error
03841001-2819 Maintenance cartridge full
03841001-281B Not enough space in the maintenance cartridge prior
to cleaning
03841101-2818 Mauntenance cartridge not installed
03841201-2816 Maintenance cartridge EEPROM error
03841201-2817 Maintenance cartridge ID error
03860001-2E0C Data with a cut sheet specification has been received
when roll media are loaded.
03860002-2E02 Data with a cut sheet specification has been received
but no cut sheets are loaded.
03860002-2E0A Data with a roll media specification has been received
when a cut sheet tray is loaded.
03860006-2825 Paper type mismatch at HP-GL/2 printing
03861001-2405 Paper loaded at a position inaccessible for borderless
printing
03861001-2406 Data unfit for borderless printing
03861001-2407 Borderless printing disabled (engine detection)
03861001-2408 Borderless printing disabled (unsupported size)
03862000-2E09 Not enough roll media on remaining roll media
quantity detection
03862001-2E31 Not enough roll media
03862002-2E32 Not enough roll media (lower roll)
03863000-2820 Printhead registration unadjustable
Condition detected Action
Replace with a valid MBK ink tank.
Replace with a valid R ink tank.
Replace with a valid G ink tank.
Replace with a valid B ink tank.
Replace with a valid PM ink tank.
Replace with a valid PC ink tank.
Replace with a valid PGY ink tank.
Renew the maintenance cartridge.
Replace the maintenance cartridge.
Install the maintenance cartridge.
Renew the maintenance cartridge.
Renew the maintenance cartridge.
Load cut sheets at the paper tray port.
Load cut sheets at the paper tray port.
Replace with roll media.
Exchange for the compatible paper to HP-GL/2
before reprinting.
Check to see if a borderless printing spacer is
installed.
Reload the paper.
Check the data, and then print again.
Reload the paper.
Check the media size.
Change the media size.
Renew the supply of roll media.
Renew the supply of roll media.
Renew the supply of roll media.
Check the paper on which a pattern is printed for
smears.
Check the environment for interferences from
outside light.
Clean the printhead.