Canon iPF6100 Service Manual page 138

Chapter 1
First Level
[System Setup]
[Prep.MovePrinter]
[Admin. Menu]*12
[Printer Info]
*1: Available only if ManageRemainRoll is On.
*2: Displays only on models not equipped with HDD.
*3: Available after Auto(Advanced) in Head Posi. Adj. has been used once.
*4: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Quality.
*5: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Length.
*6: Displayed if a sheet is loaded in the printer.
*7: Not shown if you have set IPv4 Mode to Manual.
*8: Not shown if you have set NetWare to Off.
*9: Not displayed if IPv6 Support is Off.
*10: Not shown if you have set Auto Detect to On.
*11: Print Anyway is displayed when a job being held is selected.
*12: Viewing and configuration is possible for administrators, and only viewing for other users.
*13: Viewing and configuration is possible for administrators only.
*14: Follows the setting in Date Format.
1-120
Second Level
[Nozzle Check] [Frequency]
[Warning]
[Use RemoteUI]*12 [On]*
[Off]
[Reset PaprSetngs]*12
[Erase HDD Data]*2*12 [High Speed]
[Secure High Spd.]
[Secure]
[Output Method]*2 [Print]*
[Print (Auto Del)]
[Save: Box XX]
[Print After Recv]*2 [Off]*
[On]
[Save: Shared Box]*2*12 [Off]
[On]*
[Change Password]*13
[Init.Admin.Pswd]*13
[Paper Info]
[Ink Info]
[Head Info]
[System Info]
[Error Log]
[Other Counter]
T-1-80
Third Level Fourth Level
[Standard]*
[1 page]
[Off]*
[On]
Fifth Level