Canon iPF6100 Service Manual page 373

b) Removing the main controller mounting plate
1) Remove the main controller PCB.
2) Free the harness from the harness guide.
3) Remove the screw [1] and remove the flexible guide [2].
4) Remove the four screws [1] and two hooks [2] from the harness guide and remove the main controller mounting plate [3].
c) Note on installing the cable holder
In installing the cable holder, secure ferrite core [1] to the flexible cable on the carriage with the cable holder before hooking the flexible cable from the operation
panel at the three claws [2].
[1]
F-4-144
[3]
[1]
F-4-145
[1]
F-4-146
[2]
[2]
[1]
[2]
Chapter 4
4-65