JVC GW-SP100U Instructions Manual page 61

16
17
18
●
in [Main Menu] [LCD/Monitor] [Display
Settings] [Date Style]/[Time Style].
This item is not displayed when [Main Menu]
●
[LCD/Monitor] [Display Settings]
[Date/Time] is set to "Off".
Zoom Display
19
Displays the zoom position. (Zoom bar or
●
value)
The zoom bar will only be displayed for 3
●
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to
●
99)
Memo :
You can specify the display method (Number/
●
Bar) and whether to turn off the display in
[LCD/Monitor] [Display Settings]
This item will not be displayed when "Off" is
selected.
Displayed in the Display 0 screen only when
●
there is a change.
20
focus assist is
Memo :
●
code, user's bit, or turn off the display in [LCD/
21
22
23
Memo :
●
●
●
"Zoom".
24
25
61
※
You can specify whether to display the time
Monitor] [Display Settings] [TC/UB].
This item will not be displayed when "Off" is
selected.
Event/Warning Display Area
Displays error messages.
Media Status
---- ：No card found in the selected slot
STBY ：Recording standby
REC ：Recording
●
STOP ：Unable to record to the card in
the slot
P.OFF ： Power OFF
Dual Rec Display
"DUAL" is displayed in the Dual Rec mode
This item is not displayed when [Slot Mode] is
set to "Series".
This item is not displayed when [Main Menu]
[LCD/Monitor] [Display Settings] [Media
Remain] is set to "Off". However, warnings will
be displayed.
Displayed in the Display 0 and Display
1 screens during warnings only. (When the
remaining time is shorter than 3 minutes)
FULL AUTO mode Display
is displayed when the FULL AUTO is set to "On".
M
is displayed when the FULL AUTO is set to "Off".
Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, L lights up.