LCD Monitor
■
The LCD monitor is manufactured using high-
precision technology.
Black spots may appear on the LCD monitor, or
red, blue, and/or white spots may not disappear.
However, this is not a malfunction and these
spots are not recorded on the SD card.
Others
Do not insert objects other than the memory
■
card into the card slot.
Do not block the vent on the unit.
■
Blocking of the vent causes internal heating and
Do not remove the battery or power cable
■
during recording or playback.
The camera system may not show stable
■
pictures for a few seconds immediately after the
power is turned on, but this is not a malfunction.
Do not drop this unit or subject it to strong
■
impact or vibration as it is a precision equipment.
Noise may appear in the image when
■
switching modes.
When using a tripod, to prevent the camera
■
from falling off, which may result in injuries
or damages, read the instruction manual of
the tripod to be used and make sure that it is
securely attached.
Use the tripod on a stable surface.
■
This camera system makes use of fonts by
■
Fontworks Inc.
■
This camera system makes use of M+FONTS.
23