Table of Contents
Advertisement
Gimbal Set Item
When the gimbal is connected, "Gimbal Set..."
is displayed to allow you to set up the gimbal.
Operation Mode
For specifying a gimbal operation mode.
User Control:
●
Mode for manually specifying the camera
position (pointing direction) in relation to the
position of the gimbal.
Follow Mode:
●
Mode for automatically changing the pointing
direction of the camera according to the
position of the gimbal when the gimbal
moves.
Flip Vertical
For changing the setting according to the
camera unit mounting position.
Select "Flip" to mount the camera unit on the
upper side of the video unit.
Stabilized Area
For specifying the operation range of the gimbal
where the camera is held at the initial pointing
direction even if the gmbal moves.
tilting, and rolling.
→ Pan/Tilt/Roll
Memo :
When [Operation Modes] is set to "User
●
Control", a setting value of Pan can be
selected from [0, 7] and a setting value of
Tilt/Roll can be selected from [0, 2].
Operating Speed
At the "User Control":
●
For specifying the speed at which the camera
pans, tilts, or rolls horizontally in response to
the control unit operation.
At the "Follow Mode":
●
For specifying the speed at which the camera
pans, tilts, or rolls horizontally in response to
the gimbal moves.
tilting, and rolling.
→ Pan/Tilt/Roll
Delay
For specifying the time that lapses until the
camera starts moving after the gimbal moves.
tilting, and rolling.
→ Pan/Tilt/Roll
Motor Adjust
For adjusting the power of the motor for
panning, tilting, and rolling according to the
weight of the camera that changes with the type
of lens.
tilting, and rolling.
→ Pan/Tilt/Roll
58
Advertisement
Table of Contents
