Table of Contents
Advertisement
Remove the lens.
To remove the lens, turn it counterclockwise
while holding down the lens release button.
②
③
Caution :
Be sure to turn OFF the power before mounting
●
or removing the lens.
Avoid exchanging lenses in a dusty place to
●
prevent dust from entering the camera unit.
When no lens is mounted to the camera unit,
●
be sure to attach a cap on the camera unit to
inside the camera unit.
●
unit, just blow it away with a commercially
available air blower.
Hold the air blower so that its nozzle does not
●
enter the space inside the lens mount.
●
Mount the LCD unit.
①
Caution :
Be sure to turn OFF the power before
●
mounting or removing the LCD unit.
Do not press against the surface with force or
●
subject it to strong impact. Doing so may
damage or break the screens.
Connect the control unit.
Connect the control unit to configure video
settings such as brightness adjustment (iris,
gain, shutter) and white balance adjustment
or to adjust the audio input settings and audio
recording level for audio recording.
Memo :
The following settings are registered to the
●
control unit. The camera system is synchronized
with the setting contents of the control unit
automatically by connecting the controll unit
and the video unit.
These settings are not reset by executing [Reset
All] or [Reset Process] from the menu.
Full Auto/Manual, Gain position, White Balance
mode, Iris A/M, Aperture Value, AF/MF, Fix/Var,
Audio Select, Audio Level
33
Advertisement
Table of Contents
