Audio Set Item - JVC GW-SP100U Instructions Manual

HDMI/SDI Out Character
For specifying whether to display the characters
displayed on the display screen and menu
screen over the screens output from the [SDI]
and [HDMI] output terminals.
Factory default is "Off".
Genlock Adjust
Adjusts the H Phase of the camera system's video
signals with respect to the input synchronizing
signals.
→ AV Out H Phase
Adjusts the H Phase of the video signals output
from the AV output terminal with respect to
the external synchronizing signal input to the
GENLOCK terminal.
[Setting Values: -28 to +82] (
→ SDI(Moni) Out H Phase
Adjusts the H Phase of the video signals output
from the SDI(Moni) output terminal with respect
to the external synchronizing signal input to the
GENLOCK terminal.
[Setting Values: -1024 to +1023] (
→ SDI Out H Phase
Adjusts the H Phase of the video signals output
from the SDI output terminal with respect to
the external synchronizing signal input to the
GENLOCK terminal.
[Setting Values: -1024 to +1023] (

Audio Set Item

Input1 Mic Ref.
For setting the reference input level when the
[INPUT1] selection switch is set to "MIC" or "MIC
+48V".
Input2 Mic Ref.
For setting the reference input level when the
[INPUT2] selection switch is set to "MIC" or "MIC
+48V".
Ref. Level
For setting the audio reference level to be
recorded to the SD card. (Applies to both [CH1/
CH2].)
0)
●
0)
●
0)
●
52
XLR Manual Level
For setting whether to link manual audio
adjustment operation between [INPUT1] and
[INPUT2] terminals.
Select "Link" to link or "Separate" to separate.
When this item is set to "Link", adjust the
recording level using the [CH1] recording level
adjustment knob.
Memo :
Enabled only when both the [INPUT1/
●
INPUT2] input terminals are set to "LINE" or
"MIC", and both [CH1]/[CH2] of the [CH1/CH2
AUTO/MANUAL] selection switches are set to
"MANUAL".
When this item is set to "Link", [CH2]
●
recording level adjustment knob is disabled.
Limiter Mode
For setting whether to link the limiter operation
of [CH1] and [CH2].
Select "Link" to link or "Separate" to separate.
Memo :
Enabled only when [INPUT1/INPUT2] input
●
terminal are set to "LINE" or "MIC", and CH1/
CH2 of the [CH1/CH2 AUTO/MANUAL]
switch is set to "AUTO".
→ CH1 Limiter/CH2 Limiter
Sets the limiter operation for [CH-1] and [CH-2]
separately.
→ Threshold Level
Sets the maximum recording level of [CH-1] and
[CH-2] respectively.
→ Attack Time
Sets the time to activate the limiter for [CH-1]
and [CH-2] respectively.
→ Decay Time
Sets the time to deactivate the limiter operation
for [CH-1] and [CH-2] respectively.