Waste Ink Pad - Epson L1800 Service Manual

L1800

3.4.10 Waste Ink Pad

1. Remove the Printer Mechanism.
Mechanism (p.61).)
2. Remove the C.B.P. 3x8 screw that secures the Waste Ink Tube.
3. Remove the 11 Waste Ink Pads from the Lower Housing.
Waste Ink Pads
Figure 3-102. Removing the Waste Ink Pads
Disassembly And Assembly
(Refer to 3.4.4 Lower Housing / Printer
4) C.B.P. M3x8
(6±1 kgf.cm)
Disassembling the Printer Mechanism
 Route the Waste Ink Tube as shown below.
Figure 3-103. Positions of Waste Ink Tubes
 Referring to Figure
Installation
Order
2
1
Figure 3-104. Installing the Waste Ink Pads
After replacing or removing the Waste Ink Pads and the Waste Ink
A D J U S T M E N T
R E Q U I R E D
Pad, always make the required adjustments referring to the
following.
 "Chapter 4
Adjustment
Revision A
Waste Ink Tubes
3-104, correctly install the Waste Ink Pads.
4
Installation
Order
3
2
1
(p.109)"
Confidential
79