Disassembling The Printer Mechanism - Epson L1800 Service Manual

L1800

3.4 Disassembling the Printer Mechanism

3.4.1 APG Assy
1. Remove the Upper Housing / Printer Cover. (p.50)
2. Disconnect the APG Motor connector cable from connector CN118 (red) on the
Main Board.
3. Peel off the acetate tape A and acetate tape B, and release the APG Motor cable
from the ASF Assy.
4. Disconnect the cables from the two APG Sensor connectors.
Hook the APG Motor
cable on the two tabs Acetate tape A
of the ASF Assy.
Acetate tape B
Figure 3-35. Disconnecting the Cables
Disassembly And Assembly
APG Motor
APG Assy
APG Sensor
CN118
connectors
Disassembling the Printer Mechanism
 Referring to Figure
cable.
 Apply the acetate tape A according to the standard below.
APG Motor cable
Figure 3-36. Applying the Acetate tape A
5. Remove the three C.B.S. M3 x 6 screws that secure the APG Assy, and remove the
APG Assy from the Main Frame.
1
2
Figure 3-37. Removing the APG Assy
Revision A
3-35, correctly route the APG connector
Acetate tape A (18 x 13 mm)
18 mm
5 mm
2) C.B.S. M3x6
(8±1 kgf.cm)
3
Confidential
55