L1800
3.7.4.4 Valve Lever
Ink Supply Tank Assy
Valve Lever
Hook
Follow the procedure below when removing the Valve Lever.
1. Remove the Ink Supply Tank Assy from the printer.
2. Insert a flathead precision screwdriver or the like into the gap between the Right
Cover and the Tube Valve Holder Rear to release the hook of the Valve Lever, and
then remove the Valve Lever.
Disassembly And Assembly
Tube Valve Holder Rear
Flathead precision
screwdriver
Right Cover
Disassembling the CISS section
3.7.4.5 Ink Supply Tank Assy
Film
Be careful not to damage or peel off the film of the Ink Supply Tank.
Be careful about how to place the Ink Supply Tank Assy in order to prevent printing
failure from occurring. (See
"How to place the Ink Tank Assy when disassembling/
reassembling"
(p.37).)
Revision A
Ink Supply Tank
107
Confidential