Tool management
9.5 Tool list
Hiding magazines
The magazine selection behavior with multiple magazines can be configured in different
ways.
References
For a description of configuration options, refer to the
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
188
If there is only one magazine, you will move from one area to the next
(i.e. from the buffer memory to the magazine, from the magazine to
the NC memory, and from the NC memory back to the buffer memory)
each time you press the softkey. The cursor is positioned at the
beginning of the magazine each time.
- OR -
If there is more than one magazine, the "Magazine Selection" window
opens. Position the cursor on the desired magazine in this window
and press the "Go to" softkey.
The cursor jumps directly to the beginning of the specified magazine.
Deactivate the checkbox next to the magazines that you do not want to appear in
the magazine list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal