Overstore - Siemens SINUMERIK 840D sl Operating Manual

Procedure
4.9

Overstore

With overstore, you have the option of executing technological parameters (for example,
auxiliary functions, axis feed, spindle speed, programmable instructions, etc.) before the
program is actually started. The program instructions act as if they are located in a normal
part program. These program instructions are, however, only valid for one program run. The
part program is not permanently changed. When next started, the program will be executed
as originally programmed.
After a block search, the machine can be brought into another state with overstore (e.g. M
function, tool, feed, speed, axis positions etc.), in which the normal part program can be
successfully continued.
Universal
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3 Press the "Prog. ctrl." and "Skip blocks" softkeys.
The "Program control" window appears and shows a list of block
levels.
Software option
You require the "Extended operator functions" option for the overstore
function (for 828D).
Machine the workpiece
4.9 Overstore
101