Machine the workpiece
4.10 Editing a program
Note
Pasting program blocks
Jobshop machining steps cannot be copied into a G code program.
Precondition
You have opened a program in the Editor.
Procedure
See also
Copying/pasting/deleting program blocks (Page 106)
108
1.
Press the ">>" and "Open 2nd program" softkeys.
The "Select 2nd program" window opens.
2.
Select the required program that you wish to display in addition to the
program that is already open.
3.
Press the "OK" softkey.
The dual editor opens and displays both of the programs next to one
another.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal