Operations Guide; Appendix "C - ABB 691HT Operating Instructions Manual

APPENDIX "C"

DIRECT
BROAD
600T +
600T EN
WORD
OPERATIONS GUIDE (For 600T and 600T EN pressure transmitter)
PV
REVIEW
CAST
CONF
TX
DIR
PASS
TRIM
SERIAL
LINK
PV + OUTPUT CURRENT
STAT
(Here below in bold are indicated the additions for
PRESS
600T EN Pressure Transmitters; Root transfer func.
remains only for 600T Pressure transmitters.)
SENS
TEMP
Tx type, Manufacturer, Tag, Long Tag, Descriptor,
Message, Date, Device Nr., Max work Press., Max
Sensor Temp., Min Sensor Temp.
Units, Range, PV Bias Value, Damping, Output
function, Root transfer func, Sqr (x) cut linear, Min.
Span, Sensor Limits, Operative Limits, Up/Down
Scale, Polynomial Coefficients, Double Polynomial
Coefficients, 1st polynomial High limit.
TX Flange type and Material, O-rings, Vents, Remote
seal nr, Type, Fill Fluid, Isolator, Sensor Fill Fluid,
INFO
Isol. Material, Model Type, Sensor Range, Local
adjustment, Local keys control, LCD display mode.
Final Assy. nr, Sensor S/N,
Write Protect, Meter install,
Calibration type, Procedure,
Product code, Sep/service,
Manifold/orifice
Hardware Rev., Software
Rev., UCD, TSD
CHANGE
Units, Range, Damping, Output Function, Root
transfer func, SQR(x) cut linear, Polynomial Coeffs,
I/O INFO
Double Polynomial Coefficients, Sensor Temp.
Units, Static Pressure Units, Long TAG
CHANGE
Tag, Date
TX INFO
CHANGE
Polling Address
Local Keys Control
GEN.
Lcd Display Mode
DATABASE
Tag List
Save Configuration
OPERAT.
Send Configuration
Delete Configuration
Full Trim
SENSOR
Zero Trim
TRIM
Static Trim
Factory Trim
OUTPUT
Other Scale
4 to 20 mA Trim
TRIM
Factory Trim
LOOP
4 mA Output
20 mA output
TEST
other value
PV Scale
CALIB
Out %
RATION
Reranging: Set 4 mA
Set 20 mA
(For 600T Pressure Transmitters
only Reranging is available)
DATABASE
MODE
MODEM
MODE
LOAD
PROG
- 51 -