Conf - Database Operations - Delete Configuration Option - ABB 691HT Operating Instructions Manual

C h o o s e C o n f. t o s e n d
S e l e c t T A G
F T 1 0 0 L T 1 1 2
P T 2 3 4 K . S C
S T O P N E X T L A S T S E L
L I S T P A G E P A G E T A G
W A R N I N G - L o o p m a y b e
r e t u r n e d t o A U T O
DATABASE OPERATIONS
TAG SAVE SEND
LIST CONF CONF
C h o o s e C o n f. t o d e l
S e l e c t T A G
F T 1 0 0 L T 1 1 2
P T 2 3 4 K S C
S T O P N E X T L A S T S E L
L I S T P A G E P A G E T A G
C o n f i g . d e l e t e d
P r e s s a n y k e y t o
c o n t i n u e
- 30 -
Starting from the Database Main Menu, pressing F3 ( SEND CONF ) the
warning message is displayed and the following display appears. Pressing
F4 to PROCEED, appears the next display showing the list of the
configurations present in the Communicator. All tags stored in the
P R O
Communicator are displayed, four per display, at a rate of 2 seconds:
C E E D
using F1 you can stop the list whereas with F2 or F3 you can move forward
or backward in the list.
When the required tag is on the display you can select it moving the
cursor on it, using F4 (SEL TAG).
The transmission of a new configuration to a transmitter is achieved
pressing the ENTER and requires some seconds.
The message "Configuration sent" confirms that the operation has
been completed with success; in case of error an appropriate message
P R O
will be displayed ( see the relevant section of this manual ) and it will be
C E E D
allowed to return to DATABASE OPERATION menu.

CONF - Database operations - DELETE CONFIGURATION option

This option permits deletion of a configuration stored in the Database
memory of the Communicator. Press F4 for DELET CONF and the next
DELET
display appears.
CONF
The selection of the configuration to be deleted can be made selecting the
configuration from the list of the stored configurations. All tags stored in the
Communicator are displayed, four per display, at a rate of 2 seconds: using
P R O
F1 you can stop the list whereas with F2 or F3 you can move forward or
C E E D
backward in the list.
When the required tag is on the display you can select it moving, using F4,
the cursor on it: now pressing the ENTER the configuration will be deleted
from the list of the stored configurations while pressing ESCape you will
return to the previous display.
If the operation is correctly performed a confirmation display appears: then
pressing any key returns to the Database Operations Main Menu. In case
of errors a proper message will be displayed: see the relevant section of this
manual.