Chapter 6
Monitoring Settings
6.2
Various Notification Settings
The following procedure shows an example when selecting the [IPv4 Settings] tab.
2
Set up the SNMP environment.
(1)
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
(2)
In [Category], click [Network].
The [Network] screen appears.
(3)
In [Action], click [Setup SNMP Interface].
The [Setup SNMP Agent Basic Interface] screen appears.
(4)
Select [Enable] for [SNMP Function], set the required items, and click the [Set] button.
Select the LAN port that was set up in
A confirmation screen appears.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Step 1
for "LAN Port used for SNMP".
87
P3AG-1832-04ENZ0