Check the Configurations of GPS Arrestor and Bulkhead
The fixing methods and fasteners vary for the configurations of the GPS arrestor
and bulkhead. Thus, check the installation methods and configurations enclosed
with the GPS arrestor and bulkhead.
Fixing GPS Arrestor
The method to fix the GPS arrestor is as follows.
Table 22. GPS Arrestor Fixing Parts and Tools
Classification
Description
Parts
GPS arrestor/1 set
Recommended
N type nut
torque value
Working tools
Torque wrench and spanner
Figure 35. Fixing the GPS Arrestor
1 Insert the connector for the GPS arrestor along with the bulkhead fixing hole.
2 Secure the GPS arrestor with the bulkhead using fasteners. Make sure that the system-
side and antenna-side connector directions are not changed.
Verizon 4G LTE Network Extender 2 User Guide v1.1
Copyright © 2017, All Rights Reserved.
Appendix A Outdoor GPS Antenna Installation
GPS arrestor unit
Fastener
N type nut
Plane washer
GPS Arrestor
Bulkhead
Plane Washer
N Type Nut
1 EA/GPS arrestor
1 EA/GPS arrestor
1 EA/GPS arrestor
3.25~3.61 ft.lb.
(44.93~49.91 kgf.cm)
67