Settings; Figure 13. The Network Extender Network Settings Tab; Table 4. The Network Extender Network Settings Tab - Samsung 4G LTE Network Extender 2 User Manual

Settings

Network Settings
From the Network Extender Network Settings tab, you can use the checkbox to
turn DHCP on or off. If DHCP is off, you can also set the DNS information,
default gateway, IP address and subnet mask. The backhaul limit (affects uplink
speeds served by the Network Extender only) and MTU size can also be set here.
Information regarding extender settings is in Chapter 4 Configuring Your
Device.

Figure 13. The Network Extender Network Settings Tab

Table 4. The Network Extender Network Settings Tab

Item
DHCP
Default Gateway
Primary DNS
Verizon 4G LTE Network Extender 2 User Guide v1.1
Copyright © 2017, All Rights Reserved.
Description
This is a checkbox. When checked (default), DHCP is on and IP configuration shall
be provided by the local DHCP server. The user may uncheck this box in order to
specify a static IP configuration.
If DHCP is on, this field is read-only. It shows the DHCP allocated default gateway
IP address. If DHCP is off, this field is read-write and shows the user-defined
Default Gateway IP address.
If DHCP is on, this field is read-only. It shows the DHCP allocated Primary DNS
Server's IP address. If DHCP is off, this field is read-write and shows the user-
defined Primary DNS Server's IP address.
Chapter 3 The Network Extender Admin Website (Local)
21