7 Maintenance Tools
The Maintenance Tool supports several features shown below.
(1) Display information on device operation such as the number of sheets that have been fed.
(2) Download firmware:
(3) Load / Save device unique information of each device
(4) Collect information stored in the memory.
(5) Reboot the device
(6) Display error information
(7) Work Information Viewer
(8) Full Diagnosis
< In case of Memory Dump>
Do not reboot the device, which initializes / clear the information.
< Other than Memory Dump>
Power on the device first and then switch on the host.
Operate the Maintenance Tool when the device is ready.
Most features of the Maintenance Tool can be operated by command prompts.
Command prompts can be started as follows. [Start]-[All Programs]-[Accessories]-[Command Prompt]
REV0 10.02.15
-H7-1-