Hitachi HT-4139-28 Maintenance Manual page 115

REV0 10.02.15
Take the reverse step for assembly
④
8.3.40 Replacing the F/L Sensor
#105 Ｆ/Ｌ Bracket ＡＳＳＹ
Bind-head screw
#105 Ｆ/Ｌ Bracket ＡＳＳＹ
Ｆ/Ｌ Sensor Connector
#105 Ｆ/Ｌ Bracket ＡＳＳＹ
Ｆ/Ｌ Sensor Hook
-H8-52-
Pick(Ｕ)Cover
Ｆ/Ｌ Sensor Cable
Ｆ/Ｌ Sensor
#58 Ｆ/Ｌ Sensor
Ｆ/Ｌ Sensor Cable
Ｆ/Ｌ Sensoe Hook Plate(ＦＬ)
Screw
Caution: Make sure to attach the Sensor properly.
It may be the cause of errors
Tools Needed: Magnetic Philips Screwdriver (No.2)
① Remove the Pick Unit ASSY and the Pick (U)
Cover.
② Unscrew 2 bind-head screws on the F/L Bracket
ASSY and remove the F/L Bracket
※ Do not pull hard to remove the F/L Bracket
ASSY. The F/L Sensor Cable is routed onto the
F/L Bracket ASSY.
③ Disconnect the connector from the F/L Sensor
Cable.
④ Unscrew 1 screw from the countersunk (FL) and
remove the F/L Sensor.
⑤ Take the reverse steps to attach the F/L Sensor
#58 Ｆ/Ｌ Sensor
(Photo Micro
Sensor ASSY)