Hitachi HT-4139-28 Maintenance Manual page 105

REV0 10.02.15
8.3.25 Replacing the Soft Absorber
① Remove the Hopper ASSY. For instructions, please refer to "8.3.7 Replacing the Hopper ASSY"
② Unscrew 2 screws from the Front Guide. For instructions, please refer to "8.3.16 Replacing the Reverse ASSY"
③ Lift the Revere Roller ASSY and remove it from the device.
④ Unscrew 2 bind-head screws from the Reverse ASSY and slide the Reverse ASSY to the right. Rotate the
Reverse ASSY and remove it from the device. For instructions, please refer to "8.3.16 Replacing the Reverse
ASSY"
⑤ Lift the Soft Absorber up and remove it from the device
⑥ Put the spring attached to the old Soft Absorber onto the new Soft Absorber.
⑦ Take the reverse steps to attach the Soft Absorber.
⑧ Read "9.4 Checking the pressure of the Reverse Roller" and adjust the pressure on the Soft Absorber
-H8-42-
Tools Needed: Magnetic Philips Screwdriver (No.2)
#66 Soft Absorber