REV0
10.02.15
8.3.38 Replacing the Reverse Cover ASSY
① Remove the Hopper ASSY from the device. For instructions, please refer to "8.3.7 Replacing the Hopper
ASSY"
② Unscrew 2 bind-head screws from the Front Guide and remove the Front Guide.
Bind-head
screw
③ Use the -Driver and remove the Reverse Cover ASSY as shown below.
#70 Reverse Cover ASSY
④ To attach the Reverse Cover ASSY, insert "part A" and slide "part B" in the direction of the arrow shown
below.
-H8-50-
Tools Needed: Magnetic Philips Screwdriver (No.2),
Front Guide
Connector(PC11)
B
E-ring Removal
Bind-head screw
A