Display Bgp Vpnv6 Vpn-Instance Routing-Table - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
remote AS
Type
BGP version
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol
extended
Peer support bgp route refresh
capability
Address family IPv6 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisement runs
Optional capabilities
Route refresh capability
Peer Preferred Value

display bgp vpnv6 vpn-instance routing-table

Syntax
display bgp vpnv6 vpn-instance vpn-instance-name routing-table [ network-address
prefix-length [ longer-prefixes ] | peer ipv6-address { advertised-routes | received-routes } ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Description
AS number of the peer
BGP type
Version of BGP that the peer runs
Router ID of the peer
Current state of the BGP session
Duration since the peer is established
Current event of the BGP session
State that the BGP session was in before transitioning to the current
state
Local and remote ports of the BGP session
Settings of the local timers, including the active hold interval and
keepalive interval
Received active hold interval
Negotiated active hold interval
Optional capabilities of the peer
The peer supports multiprotocol extension.
The peer supports route refreshing.
IPv6 unicast family capability
Total number of received messages and the number of received update
messages
Total number of sent messages and the number of sent update
messages
Maximum number of routes that the VPN instance supports
Threshold for warning. When the percentage of the number of the
received route prefixes to the maximum number of routes supported
reaches this value, the device generates a prompt.
Minimum interval between route advertisements
Local optional capabilities
Whether route refreshing is enabled
Preference value specified for routes from the peer
475