Display Ip Vpn-Instance - HP FlexNetwork 3600 v2 Series Command Reference Manual

FIB entry count: 1
Flag:
U:Useable
Destination/Mask
10.2.1.1/32
For more information about the command output, see

display ip vpn-instance

Syntax
display ip vpn-instance [ instance-name vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
instance-name
vpn-instance-name is the VPN instance name, a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip vpn-instance to display information about VPN instances.
If you do not specify any parameter, the command displays brief information about all VPN
instances.
Examples
# Display information about all VPN instances.
<Sysname> display ip vpn-instance
Total VPN-Instances configured : 2
VPN-Instance Name
vpn1
vpn2
Table 108 Command output
Field
VPN-Instance Name
RD
Create Time
G:Gateway H:Host
Nexthop Flag
127.0.0.1 UH
vpn-instance-name:
RD
22:1
33:3
B:Blackhole D:Dynamic
OutInterface InnerLabel Token
InLoop0 Null
Table 107.
Displays information
Create Time
2008/10/13 09:32:45
2008/10/13 09:42:59
Description
Name of the VPN instance
RD of the VPN instance
Time when the VPN instance was created
458
S:Static
Invalid
about the specified VPN.