Ipv6 Is-Is Configuration Commands; Display Isis Route Ipv6 - HP FlexNetwork 3600 v2 Series Command Reference Manual

IPv6 IS-IS configuration commands

IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information
instead. This document describes only IPv6 IS-IS exclusive commands. See
commands" for other IS-IS configuration commands.
The term "router" in this chapter refers to both routers and Layer 3 switches.
HPE FlexNetwork 3600 v2 SI Switch Series does not support IPv6 IS-IS.

display isis route ipv6

Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: IS-IS process ID, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
NOTE:
If no level is specified, both Level-1 and Level-2 (Level-1-2) routing information will be displayed.
Description
Use display isis route ipv6 to display IPv6 IS-IS routing information.
Examples
# Display IPv6 IS-IS routing information.
<Sysname> display isis route ipv6
Route information for ISIS(1)
-----------------------------
330
"IS-IS configuration