Default Local-Preference (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View); Default Med (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Use undo dampening to disable route dampening.
By default, no route dampening is configured.
Related commands: reset bgp ipv6 dampening, reset bgp ipv6 flap-info, display bgp ipv6
routing-table dampened, display bgp ipv6 routing-table dampening parameter, and display
bgp ipv6 routing-table flap-info.
Examples
# Enable IPv6 BGP route dampening and configure route dampening parameters.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] dampening 10 10 1000 2000 3000
default local-preference (IPv6 address family view/IPv6
BGP-VPN instance view)
Syntax
default local-preference value
undo default local-preference
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
value: Default local preference, in the range of 0 to 4294967295. The larger the value is, the higher
the preference is.
Description
Use default local-preference to configure the default local preference.
Use undo default local-preference to restore the default value.
By default, the default local preference is 100.
Use this command to affect IPv6 BGP route selection.
Examples
# Two devices A and B in the same AS are connected to another AS. Change the local preference of
B from default value 100 to 180, making the route passing B preferred.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] default local-preference 180
default med (IPv6 address family view/IPv6 BGP-VPN
instance view)
Syntax
default med med-value
348