Ipv4-Family Vpn-Instance - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-vpn-ipv4-vpn1]

ipv4-family vpn-instance

Syntax
ipv4-family vpn-instance vpn-instance-name
undo ipv4-family vpn-instance vpn-instance-name
View
BGP view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Associates a VPN instance with an IPv4 address family and
enters BGP VPN instance view. The vpn-instance-name argument specifies the VPN instance name,
a case-sensitive string of 1 to 31 characters.
Description
Use ipv4-family vpn-instance to enter BGP-VPN instance view.
Use undo ipv4-family vpn-instance to remove all the configurations performed in the view.
Before entering BGP VPN instance view, make sure the corresponding VPN instance is created.
Examples
# Enter BGP-VPN instance view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1]
peer allow-as-loop
Syntax
peer { group-name | ip-address } allow-as-loop [ number ]
undo peer { group-name | ip-address } allow-as-loop
View
BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of the peer group, a string of 1 to 47 characters.
ip-address: IP address of the peer.
number: Maximum number that the local AS number can appear repeatedly in the AS-PATH attribute.
It ranges from 1 to 10 and defaults to 1.
466