Yamaha MMP1 Operation Manual page 55

The resulting signal flow is described in detail below.
DAW
(Dante In 01-06)
CD
(AES/EBU In 01-02)
9.
Adjust Speaker Sets as necessary.
Speaker Management screen
10.
Create buttons to switch between Speaker Sets.
NOTE
• Create two buttons with the following settings:
Function "Speaker Select," Parameter "A," and
Function "Speaker Select," Parameter "B." Buttons
do not need to be created in the same place as that
shown in the image below.
• Double click the Label field to enter a name.
• Click the Color field to change button color.
Settings screen - Scene - User Assignable
Create User Assignable buttons for Speaker Set A and
Speaker Set B to be able to switch between Speaker
Sets on the Main screen.
Monitor matrix Speaker matrix
Main Monitor 01-06
(Main Monitor 01-02)
11.
Main Monitor settings are now complete.
5. Configuring System Settings
Speaker
Set A
Main Monitor
(Analog Out 1-6)
Speaker
Set B
Near Field
(Analog Out 1/2)
Confirm that the buttons for switching between
Speaker Sets appear on the Main screen.
Main screen
MMP1 Operation Manual 55