Yamaha MMP1 Operation Manual page 25

4-1-7c. Correspondence table of assignable audio signals
Source
Dante In Input from the Dante
[PRIMARY]/[SECONDARY]
1-64
connectors on the MMP1.
Analog In Input from the ANALOG
1-8 [INPUT 1-8] connectors on
the MMP1.
AES/EBU In Input from the [AES/EBU 1-8]/
[AES/EBU 9-16] connectors
1-16
on the MMP1.
CH Strip Out
Channel strip output signals.
1-8
CH Strip 1-8 Channel strip Insert Send
Ins Send signals.
PFL Bus Out Pre Fader Listen for the
channel strip.
AFL Bus Out After Fader Listen for the
channel strip.
RTB Bus Out Return Talk Back. Input
signals to the channel strip
are output directly without
passing through the channel
strip.
Monitor Main Monitor, Cue, Studio
Speaker, and AUX signals
Matrix Meter
output to the meter.
Out 1-32
Downmix Downmix L/R signals output
to the meter.
Meter Out L/R
Headphone Headphone L/R signals
output to the meter.
Meter Out L/R
Monitor Signals input to Monitor Matrix
Out 1-32. The sources which
Matrix Out
can be selected depends on
1-32
the settings under the
"Monitor Matrix Out" in the
"Monitor Matrix" of the
"Scene" tab on the Settings
screen.
Downmix Out Signals input to Downmix Out
L/R L/R.
Headphone Signals input to Headphone
Out L/R Out L/R.
SPK Matrix Signals input to Speaker
Matrix Out 1-32. The sources
Out 1-32
which can be selected
depends on the "Speaker
Matrix" of the "Scene" tab on
the Settings screen.
Direct SPK Signals input to Direct
Speaker Send.
Out 1-6
Oscillator Internal MMP1 oscillator.
Monitor Channel Speaker
Matrix In Strip In Matrix In
  
  
  
 
 
 
 
 






 
 
  
Direct Dante Out
Talkback
Speaker Analog Out
Mic In
Send AES/EBU Out
  
  
  
  

 
 
 
 
 
 
 
 
 


  
MMP1 Operation Manual
4. Screens
25