Editor View - Preference Screen - Yamaha MMP1 Operation Manual

4-2-5. Editor view - Preference screen

This screen is used to configure various MMP1 Controller settings.
Add names (labels) to buttons used to
select Talkback interrupt destinations
Select the control
method for the Control
view Monitor Level
Knob
Select how knobs
located on each
screen are controlled
(excluding the Monitor
Level Knob)
Select whether to show a confirmation message or not when recalling a Scene
Talkback Label Enter a channel name up to 17 alphanumeric characters and symbols.
Speaker Label Enter a channel name up to 17 alphanumeric characters and symbols.
Monitor Level Knob Operation
Rotary Drag to change the value as you would rotate a knob.
Linear Drag up and down or left and right to change a value.
Knob Operation
Rotary Drag to change the value as you would rotate a knob.
Linear Drag up and down or left and right to change a value.
Recall Confirmation When turned on (green), a confirmation dialog box will appear when recalling a Scene, and when turned off
the Scene will be recalled without a confirmation message.
Talkback Button Behavior
Latch Toggles between on and off when tapped.
Momentary Turns on while being held, and turns off when released.
Add names (labels) to buttons used to
select Speaker Sets
Select the "Talkback Button Behavior"
4. Screens
Shows/hides the status
of mics controlled with
the Commentary
functions on the CH
Strip screen
MMP1 Operation Manual 50