Table of Contents
Advertisement
Figure 4 Align the shelves to the other side wall.
4. Raise the cabinet to a standing position, see figure 5 below.
Figure 5 The Cabinet in a standing position seen from behind.
5. Take out the provided cross bars and assemble them loosely together in pairs
using M6x20 screws and M6 lock nuts, see figure 6 below.
Note: The screw should be threaded through the cross bars with the head
pointing backwards.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 5
Advertisement
Table of Contents
