Table of Contents
Advertisement
2.2 A
SSEMBLING THE
C
ABINET
Note: It is important to initially, not tighten the screws.
1. Put one of the two side walls on the floor, see figure 1 below.
Top
Figure 1 Put the side wall on the floor
2. Align the edges of the shelves into the holes of the side wall and attach them to
the front side using M6x20 screws, see figure 3 below.
Note: Do not tighten the screws at this moment.
Note: Make sure the shelf's back side is facing the floor. See figure 2 below.
Document Number:
Prepared by:
Approved by:
OPEN
I
C
NDOOR
M
EDIUM
INS-0038
Mikael Lindevall
Ulf Krohn
S
ABINET
MALL AND
Front
Revision:
A
Date:
2012-04-26
Status:
RELEASED
I
NDOOR
Bottom
Page 3
Advertisement
Table of Contents
