Table of Contents
Advertisement
7. Attach the second pair of cross bars to the first pair using M6x20 screws
according to figure 21 below.
Note: It is important that you attach the cross bars in the correct positions, see
figure 20 below.
Figure 20 The cross bars attached in the correct positions
8. Attach the cross bars and the bottom shelf to the cabinet, see figure 21 below.
Figure 21 Attach the cross bars at the bottom of the cabinet.
9. Attach the rest of the battery shelves from the back side using M6x20 screws.
10. Attach the roof to the side walls using M6x20 screws, see figure 22 below.
11. Tighten all the screws to a torque of 6 Nm.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 17
Advertisement
Table of Contents
