Table of Contents
Advertisement
5.2 A
SSEMBLING THE
Note: It is important to initially, not tighten the screws.
1. Put one of the two side walls on the floor, see figure 14 below.
Top
Figure 14 Put the side wall on the floor
2. Align the edges of the shelves into the holes of the side wall and attach them
to the front side using M6x20 screws, see figure 16 below.
Note: Do not tighten the screws at this moment.
Note: Make sure the shelf's back side is facing the floor. See figure 15 below.
Document Number:
Prepared by:
Approved by:
I
NDOOR
INS-0038
Mikael Lindevall
Ulf Krohn
OPEN
C
L
ABINET
ARGE
Front
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Bottom
Page 13
Advertisement
Table of Contents
