Table of Contents
Advertisement
Figure 19 Assembling the cross bars.
6. Attach the first pair of cross bars to the side walls using M6x16 screws,
according to figure 20 below. Start with the top part and fasten the cross loosely
using M6x20 screws.
Note: Do not tighten the screws at this moment.
Figure 20 Attach the cross bars starting from the top
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 16
Advertisement
Table of Contents
