Mitsubishi Electric AJ65SBT2B-64DA User Manual page 22

Item
Noise immunity
Communication
part, module
power supply
part
Partie
External
communication,
wiring
Partie
system
alimentation du
Système
module
de
câblage
externe
I/O part
Partie entrée/
sortie
Applicable wire size
Taille du fil à utiliser
Applicable solderless
terminal
Borne sans soudure à
utiliser
Module fixing screw
Applicable DIN rail
External power supply
Weight
*1 Factory setting is -10 to 10V.
*2 The accuracy does not apply when noise exists.
Table 2.2 Performance specifications
Noise voltage : 500Vp-p, tested by noise simulator of noise width
of 1 s and noise frequency of 25 to 60Hz
7-point 2-piece terminal block
M3 5.2 Tightening torque: 0.59 to 0.88N•m
Applicable solderless terminal: 2 or less
Plaque à bornes 7-points deux pièces
M3 5,2 Couple de serrage : 0,59 à 0,88 N•m
Borne sans soudure à utiliser : 2 ou moins
18-point two-piece terminal block
M3 5.2 Tightening torque: 0.59 to 0.88N•m
Applicable solderless terminal: 2 or less
Plaque à bornes 18-points à montage direct
M3 5,2 Couple de serrage : 0,59 à 0,88 N•m
Borne sans soudure à utiliser : 2 ou moins
• RAV1.25-3 (conforming to JIS C 2805)
[Applicable wire size :0.3 to 1.25mm
• V2-MS3, RAP2-3SL, TGV2-3N
[Applicable wire size: 1.25 to 2.0mm
• RAV1.25-3 (conforme à la norme JIS C 2805)
[Taille de fil à utiliser : 0,3 à 1,25mm
• V2-MS3, RAP2-3SL, TGV2-3N
[Taille de fil à utiliser : 1,25 à 2,0mm
M4 screw
(tightening torque range: 0.78 to 1.08N•m)
DIN-rail mounting is also possible.
TH35-7.5Fe, TH35-7.5Al (Compliant with IEC 60715)
24V DC (Ripple ratio: within 5%)
(Allowable voltage range 20.4 to 28.8V DC)
Inlush current: 2.6A, 3.2ms or shorter
Current consumption: 0.24A (24V DC)
5
AJ65SBT2B-64DA
2
0.3 to 2.0mm
2
0,3 à 2,0 mm
2
]
2
]
2
]
2
]
0.7mm 16mm or larger
0.25kg