Menus - GE C60 Instruction Manual

4.2 FACEPLATE INTERFACE
d) CONTROL OF ONE BREAKER
For this application the relay is connected and programmed for breaker No. 1 only. Operation for this application is identical
to that described for two breakers.
a) NAVIGATION
Press the key to select the desired header display page (top-level menu). The header title appears momentarily fol-
lowed by a header display page menu item. Each press of the
illustrated below.
ACTUAL VALUES
"
## ACTUAL VALUES
4
## STATUS
!
USER DISPLAYS
(when in use)
"
User Display 1
b) HIERARCHY
The setting and actual value messages are arranged hierarchically. The header display pages are indicated by double
scroll bar characters (##), while sub-header pages are indicated by single scroll bar characters (#). The header display
pages represent the highest level of the hierarchy and the sub-header display pages fall below this level. The MESSAGE
and keys move within a group of headers, sub-headers, setting values, or actual values. Continually pressing the
MESSAGE key from a header display displays specific information for the header category. Conversely, continually
pressing the MESSAGE key from a setting value or actual value display returns to the header display.
HIGHEST LEVEL
## SETTINGS
## PRODUCT SETUP
## SETTINGS
## SYSTEM SETUP
4-10
!
SETTINGS
"
## SETTINGS
##
PRODUCT SETUP
LOWEST LEVEL (SETTING VALUE)
# PASSWORD
# SECURITY
C60 Breaker Management Relay
key advances through the main heading pages as
!
COMMANDS
"
## COMMANDS
## VIRTUAL INPUTS
ACCESS LEVEL:
Restricted
4 HUMAN INTERFACES

4.2.8 MENUS

!
TARGETS
"
No Active
Targets
GE Multilin