Remote Devices Statistics - GE C60 Instruction Manual

6 ACTUAL VALUES
!
PATH: ACTUAL VALUES STATUS
# REMOTE DEVICE
1
#
MESSAGE
Statistical data (2 types) for up to 16 programmed Remote Devices is shown here.
• The StNum number is obtained from the indicated Remote Device and is incremented whenever a change of state of
at least one DNA or UserSt bit occurs.
• The SqNum number is obtained from the indicated Remote Device and is incremented whenever a GOOSE message
is sent. This number will rollover to zero when a count of 4,294,967,295 is incremented.
!
PATH: ACTUAL VALUES DIGITAL COUNTERS
# DIGITAL COUNTERS
# Counter 1
MESSAGE
MESSAGE
MESSAGE
The present status of the 8 digital counters is shown here. The status of each counter, with the user-defined counter name,
includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date/time stamp
for the frozen count. The
Counter n MICROS
!
PATH: ACTUAL VALUES STATUS
# FLEX STATES
#
MESSAGE
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
!
PATH: ACTUAL VALUES STATUS
# ETHERNET
#
MESSAGE
GE Multilin
!"

REMOTE DEVICES STATISTICS

REMOTE DEVICE 1
StNum:
REMOTE DEVICE 1
SqNum:
!"
DIGITAL COUNTERS
Counter 1 ACCUM:
0
Counter 1 FROZEN:
0
Counter 1 FROZEN:
YYYY/MM/DD HH:MM:SS
Counter 1 MICROS:
0
value refers to the microsecond portion of the time stamp.
!"
FLEX STATES
PARAM 1: Off
Off
↓
PARAM 256: Off
Off
!"
ETHERNET
ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
STATUS: OK
C60 Breaker Management Relay
6.2.8 REMOTE DEVICES STATISTICS
!
REMOTE DEVICE 1(16)
0
0
!
DIGITAL COUNTERS Counter 1(8)
Range: Off, On
Range: Off, On
Range: Fail, OK
Range: Fail, OK
6.2 STATUS
6.2.9 DIGITAL COUNTERS
6.2.10 FLEX STATES
6.2.11 ETHERNET
6-5
6