GE c60 Instruction Manual page 139
Breaker protection system
Hide thumbs
Also See for c60:
- Instruction manual (682 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (680 pages)
Table of Contents
Advertisement
CHAPTER 5: SETTINGS
To enable the security system and require password use:
1.
Select the Security > User Management menu item to open the user management window.
2.
Check the Enable Security check box in the lower-left corner to enable the security management system.
If you force password entry by using this feature, ensure that you know the Administrator password. If you do
not know the password and are locked out of the software, contact GE Digital Energy for the default password
NOTE
or a UR device. When using CyberSentry, the default password is "ChangeMe1#".
Security is now enabled for the EnerVista UR Setup software. Upon starting the software, users are now required to enter a
username and password.
Add a new user account
The following pre-requisites are required to add user accounts to the EnerVista security management system:
•
The user adding the account must have administrator rights
•
The EnerVista security management system must be enabled (previous section)
To add a user account:
1.
Select the Security > User Management item from the top menu to open the user management window.
2.
Enter a username in the User field. The username must be 4 to 20 characters in length.
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
PRODUCT SETUP
5
5-13
Advertisement
Table of Contents
