Table of Contents
Advertisement
4 PROGRAMMING
e) PROGRAMMABLE MESSAGE
•
PROGRAMMABLE MESSAGE: A 40-character message can be programmed using the key-
pad, or via the serial port using the 239PC software. Using the 239 keypad, a new message can
be written over the existing message as shown below.
] PROGRAMMABLE
] MESSAGE
Phone: 905-294-6222
GEindustrial.com/pm
VALUE
TIPS:
•
The setpoint access jumper must be installed in order to alter the characters.
•
To skip over a character press the
•
If a character is entered incorrectly, press the
returns to the position of the error, and re-enter the character.
•
To select this message as a default message, see Section 3.6: DEFAULT MESSAGES on
page 3–6.
A copy of this message is also displayed in Actual Values page A1 under 352*5$00$%/(
•
0(66$*( .
f) PRODUCT OPTIONS
•
SELECT OPTIONS TO ENABLE: The 239 factory options can be updated in the field. Enter the
new desired options for the 239.
•
SELECT MOD 1 TO ENABLE: Enter the desired mod. If no MOD is to be enabled enter zero (0).
•
SELECT MOD 2 TO ENABLE: Enter the desired mod. If no MOD is to be enabled enter zero (0).
•
SELECT MOD 3 TO ENABLE: Enter the desired mod. If no MOD is to be enabled enter zero (0).
•
SELECT MOD 4 TO ENABLE: Enter the desired mod. If no MOD is to be enabled enter zero (0).
•
SELECT MOD 5 TO ENABLE: Enter the desired mod. If no MOD is to be enabled enter zero (0).
•
ENTER PASSCODE: To enter a passcode through the keypad use the value up and/or value
down keys. When the appropriate character is reached press the message right key to move to
the next character to be entered. If a character was entered incorrectly use the message left or
GE Multilin
Courtesy of NationalSwitchgear.com
VALUE
MESSAGE
Phone: 905-294-6222
GEindustrial.com/pm
STORE
NEW SETPOINT
STORED
DISPLAYED FOR 3 SECONDS
WHEN STORE KEY IS PRESSED
STORE
239 Motor Protection Relay
4 PROGRAMMING
STORE
NEW SETPOINT
STORED
DISPLAYED FOR 3 SECONDS
WHEN STORE KEY IS PRESSED
CONTINUE TO ENTER THE
REMAINING CHARACTERS
key.
key repeatedly until the cursor
STORE
4
4-7
Hide quick links:
Advertisement
Table of Contents
