Feedıng Pıpe Of The Upper Spray Arm And Fılter Support; Side Walls; Regeneratıon Contaıner - Blomberg DW 14110 NBL00 Service Manual

13.10. Feedıng Pıpe Of The Upper Spray Arm And Fılter Support

13.11. Side Walls

13.12. Regeneratıon Contaıner
Filter support is freed after the related screw is loosened. After
the notch of the feeding pipe of the upper spray arm is released,
both of the parts are taken out. After the notch located on the
filter support is extended, it is removed from the upper feeding
pipe.
A total of 7 screws, as 3 in the front, 2 at the back and 2 at the top, are
loosened and the side walls are taken out.
BUILT- UNDER DISHWASHER
The 2 metal notches are released
through a screwdriver. The lid of
the regeneration container is taken
out by being rotated in the counter
clockwise direction at 5-10˚.
85 2011